Nederlands
Français
Deutsch
- New
- Niet op voorraad
X-treme Smile® X-treme Professional Teeth Whitening Lamp
Premium professional teeth whitening lamp with 12 powerful LEDs, 60 W power, adjustable light intensity, NO-TOUCH sensor control and integrated temperature regulation. Designed for high-end salons and practices.
€1,700.00
Tax excluded
Coins promotion
Earn up to 1700 Coins with this product
›
Insured shipping
Personal support
Professional quality since 2010
Premium salon equipment for professional teeth whitening
X-treme Smile® X-treme Professional Teeth Whitening Lamp
The X-treme Smile® X-treme is a premium freestanding whitening lamp for professional salons, practices and fixed treatment rooms. This model combines powerful LED technology with NO-TOUCH sensor control, temperature monitoring, ergonomic positioning and a premium appearance.
The professional light system features 12 powerful LEDs with a total power of 60 W. Light intensity can be adjusted, while the integrated temperature control system monitors the operating temperature during use.
Thanks to the adjustable treatment arm, flexibly positionable lamp head and hygienic sensor control, the X-treme is designed for professionals who value not only performance, but also ease of use, ergonomics and a clean professional workflow.
LED system 12 powerful LEDs · 60 W
NO-TOUCH Hygienic sensor control
Temperature Automatically controlled
Design Premium professional salon model
Why choose the X-treme?
- Premium professional whitening lamp for salons and practices
- 12 powerful LEDs
- 60 W professional LED system
- Blue light of approximately 460–490 nm
- Light intensity of approximately 300–400 mW/cm²
- Adjustable light intensity
- Hygienic NO-TOUCH sensor control
- Integrated temperature regulation
- Large digital display
- Ergonomically adjustable treatment arm
- Flexibly positionable lamp head
- Mobile professional salon model
- Designed for a fixed professional treatment room
12 powerful LEDs with 60 W power
The X-treme features 12 powerful LEDs with a combined electrical power of 60 watts.
The blue light is within the professional whitening range of approximately 460–490 nm. Light intensity is approximately 300–400 mW/cm².
The lamp is designed to illuminate the visible teeth evenly when positioned correctly as part of a professional treatment protocol.
NO-TOUCH sensor control
One of the characteristic features of the X-treme is the integrated NO-TOUCH sensor. This allows the light function to be controlled without repeatedly touching the lamp head.
Touch-free operation
A hand movement near the sensor can be used to control the light function without direct contact with the control panel.
Practical during treatments
Because the lamp does not need to be physically touched every time, the NO-TOUCH function fits well into a professional workflow where efficient and hygienic working practices are important.
Integrated temperature control
The X-treme features an integrated temperature control system. The temperature is monitored during use so that the system continues to operate within its intended working range.
The regulated operating temperature is approximately 35–40 °C, with around 37 °C used as the nominal operating temperature.
The temperature control system supports stable operation of the equipment during professional use.
Professional features of the X-treme whitening lamp
Adjustable light intensity
Light output can be adjusted so that the settings can be adapted to the treatment protocol being used.
Digital display
The central display provides information about the selected settings and makes the main functions easy to control.
Temperature monitoring
The integrated control system monitors the operating temperature during use.
NO-TOUCH sensor
The sensor control allows the light function to be operated without repeatedly touching the lamp head.
Adjustable treatment arm
The multi-adjustable arm provides extensive freedom of movement for accurate positioning alongside different treatment chairs.
Flexible lamp head
The lamp head can be adjusted to the client’s position so that the treatment area can be illuminated correctly.
Mobile base
The mobile base makes it easy to move the lamp within the treatment room.
Premium salon model
The combination of size, appearance, controls and ergonomic positioning makes the X-treme particularly suitable for a fixed high-end professional treatment room.
Designed for professional use
The X-treme is designed for professionals who are not only looking for a powerful whitening lamp, but who also value ergonomics, hygienic operation, temperature control and appearance.
The freestanding system is therefore particularly suitable for professional treatment rooms where the whitening lamp forms a permanent and visible part of the salon or practice interior.
Who is the X-treme suitable for?
- Professional salons with a fixed treatment room
- Professionals who regularly perform teeth whitening treatments
- Beauty salons and specialist beauty practices
- Professional whitening studios
- Dental cosmetic practices
- Dental and dental hygiene practices
- Professionals who value NO-TOUCH operation
- Practitioners who place a strong emphasis on ergonomics
- Salons looking for a premium professional device
- Professionals who want to combine design and technology
X-treme or Ultra?
The X-treme and Ultra are both powerful professional salon models, but each has a different focus.
X-treme Smile® X-treme
The X-treme is the premium salon model for professionals who, in addition to powerful performance, value NO-TOUCH operation, temperature control, ergonomics, appearance and ease of use.
X-treme Smile® Ultra
The Ultra focuses primarily on high light output, straightforward operation and more intensive professional use.
If maximum light output is your main priority and additional premium functions are less important, the Ultra may be the more suitable option.
Technical specifications X-treme whitening lamp
- Professional freestanding model
- Light source: 12 powerful LEDs
- Total power: 60 W
- Light colour: blue
- Wavelength: approx. 460–490 nm
- Light intensity: approx. 300–400 mW/cm²
- Adjustable light intensity
- NO-TOUCH sensor control
- Digital controls and display
- Integrated temperature regulation
- Operating temperature: approx. 35–40 °C
- Nominal regulated temperature: approx. 37 °C
- Multi-adjustable treatment arm
- Flexibly positionable lamp head
- Mobile base
- Power supply: AC 100–240 V, 50/60 Hz
Light output is about more than wattage
The X-treme features a powerful 60 W LED system, but wattage alone does not determine how much usable light ultimately reaches the treatment area.
LED efficiency, light distribution, distance from the teeth, lamp-head angle and correct positioning also play an important role.
The X-treme therefore combines powerful LED technology with a highly adjustable construction and adjustable light intensity for accurate professional use.
What do you receive?
X-treme Smile® X-treme whitening lamp
You receive the professional X-treme Smile® X-treme whitening lamp as standalone professional equipment.
Standalone professional whitening lamp
This product includes the standalone professional whitening lamp.
Training, whitening products, treatment kits and other starter materials are not included.
Do you also need professional training and starter materials?
If you are just starting with professional teeth whitening, choose a complete starter kit in which the professional X-treme whitening lamp is combined with our training, practical training, guidance and the required treatment materials.
- Brand
- X-treme Smile®
- Application
- Professional teeth whitening
- Product type
- Teeth whitening lamp
- Suitable for
- Professional use
Warranty & repair service for X-treme Smile® whitening lamps
For X-treme Smile® whitening lamps, the warranty period stated on the relevant product page and/or purchase documentation applies. In addition to warranty handling, X-treme Smile® provides its own repair service for our whitening lamps.
Warranty and repair services at X-treme Smile® are provided on a walk-in / carry-in basis. This means that the equipment must be delivered to X-treme Smile® for assessment, warranty handling or repair. If the equipment is shipped, shipping and transport costs are borne by the customer.
Warranty
If you believe there may be a warranty issue, contact us first. We determine the appropriate next steps and, where necessary, can technically inspect the equipment.
Do not open, modify or have the equipment repaired by third parties without prior coordination. This may affect safety and the assessment of the warranty claim.
Our own repair service
Even when a defect is not covered by warranty or the warranty period has expired, we can inspect and repair many X-treme Smile® whitening lamps through our own repair service.
After technical inspection, we first clearly explain the issue and the expected costs before any further paid repair work is carried out.
Walk-in / carry-in warranty
Transport costs are not included
X-treme Smile® warranty and repair service operates on a walk-in / carry-in basis. The customer is responsible for delivering and, where applicable, collecting the whitening lamp.
If equipment is shipped by a carrier, all shipping, transport, packaging and any insurance costs are borne by the customer.
This applies to:
- shipping a whitening lamp to X-treme Smile® for inspection;
- shipping a whitening lamp for warranty assessment;
- shipping a whitening lamp for a paid repair;
- return shipment of inspected or repaired equipment;
- shipping a replacement part;
- shipping a replacement whitening lamp when replacement of the equipment is applied.
Shipping and transport costs are not part of X-treme Smile®'s commercial warranty and are not reimbursed by X-treme Smile®, unless expressly agreed otherwise in writing in advance.
X-treme Smile® is not obliged to provide a free shipping label for warranty or repair shipments.
What is covered by warranty?
The warranty is intended for technical, electronic, mechanical, material or manufacturing defects that arise within the applicable warranty period during normal, careful and intended use of the whitening lamp.
- Technical or electronic faults arising during normal use
- Defects in internal components that were not caused by an external factor
- Mechanical defects in parts designed to move or be adjusted, when these arise during normal use
- Material or manufacturing defects
- Other defects where technical inspection shows that they were not caused by user damage, improper use or an external cause
X-treme Smile® inspects the equipment and, based on the nature and cause of the defect, determines whether the problem falls within the applicable warranty conditions.
What is not covered by warranty?
Damage or defects caused by improper or careless use, an external cause, insufficient maintenance or actions carried out on the equipment are not covered by the commercial warranty. This includes, but is not limited to:
- Damage caused by dropping, impact or collision
- Breakage, bending or deformation caused by moving, twisting, bending or loading fixed or non-adjustable parts
- Damage caused by using adjustable arms, hinges, pivot points or other moving parts with excessive force or beyond their normal range of movement
- Water, moisture or liquid damage, including spilled liquids, cleaning agents entering the equipment, condensation, leakage or high moisture exposure
- Incorrect connection of the equipment
- Use of an incorrect mains voltage, power supply, adapter, plug or other electrical connection
- Damage caused by voltage surges, power supply problems, short circuits, lightning strikes or other external electrical causes
- Use of unsuitable or non-approved accessories, parts, power supplies or connection materials
- Opening or dismantling the equipment without prior permission from X-treme Smile®
- Repairs, alterations, modifications or technical work carried out by the customer or unauthorised third parties
- Removing, bypassing or modifying safety or protective devices
- Damage caused by incorrect assembly or installation
- Use that does not comply with the user manual, safety instructions or intended use of the equipment
- Overloading or overheating caused by incorrect use, blocked ventilation or insufficient free space around ventilation openings
- Damage caused by storage or use under unsuitable conditions, including extreme heat, cold, moisture, direct sunlight or heavily contaminated environments
- Damage caused by incorrect cleaning or disinfection, including aggressive cleaning products, solvents or spraying liquids directly into electrical or mechanical parts
- Damage caused by insufficient maintenance or failure to follow maintenance, cleaning or operating instructions
- Corrosion, contamination or deterioration caused by liquids, chemicals or incorrect cleaning
- Transport damage occurring after delivery
- Transport damage caused by inadequate or unsuitable packaging
- Normal wear and tear that can reasonably be expected during regular use
- Cosmetic damage such as scratches, discolouration or signs of use that do not affect technical operation
- Damage caused by fire, flooding or other external events
- Damage caused by any other improper, careless or unintended use
If the serial number, rating plate or other identification required for the equipment has been removed, altered or made illegible, this may make assessment of a warranty claim impossible.
A listed exclusion does not automatically mean that every fault or damage of that type is outside the warranty. The assessment is based on the actual cause of the defect.
Cost of a paid repair
- Inspection fee: €25
- Labour: €60 excl. VAT per hour
- Required parts and materials are charged separately
- Outbound and return shipping and transport costs are not included
The inspection fee applies to a paid repair or when inspection shows that the defect is not covered by the applicable warranty.
If X-treme Smile® accepts the defect as a warranty case, no inspection fee is charged as a paid repair for the warranty assessment. Any shipping and transport costs remain the customer's responsibility, including in an accepted warranty case.
After inspection, we clearly inform you in advance of the expected repair costs. Where reasonably possible at that stage, we indicate the expected labour costs and the costs of required parts or materials.
We will not carry out any further paid repair work until the expected costs have been communicated to you and the repair has been agreed.
How the repair and warranty procedure works
1
Report the fault
Contact X-treme Smile® first and provide the lamp model, purchase details and a clear description of the problem. Photos or videos may assist the initial assessment.
2
Initial assessment
We review the available information and let you know whether additional details are required and whether the equipment needs to be delivered for technical inspection.
3
Deliver or ship the equipment
You can deliver or ship the equipment to X-treme Smile® in accordance with the instructions provided. When shipped, transport and shipping costs are borne by the customer.
4
Technical inspection
We inspect the equipment and try to determine the cause of the defect. We also assess whether the problem falls within the applicable warranty conditions.
5
Warranty or paid repair
If the defect is accepted as a warranty case, the warranty procedure is followed. If the defect is not covered by warranty or the warranty period has expired, we may offer a paid repair.
6
Costs communicated in advance
For a paid repair, you receive information on the expected labour and parts costs after inspection and before any further work is carried out.
7
Repair or replacement
After agreement, we carry out the agreed repair. Labour is charged at €60 excl. VAT per hour; parts and materials are not included. If replacement is chosen under warranty, we may send a replacement part or device.
8
Return shipment or replacement equipment
Under our walk-in / carry-in arrangement, the costs of returning inspected or repaired equipment and the shipping costs of any replacement part or replacement whitening lamp are borne by the customer.
Important information about transport and packaging
- Always contact us before sending a whitening lamp.
- Only send equipment after you have received service or return instructions.
- Pack the whitening lamp carefully and use packaging suitable for the weight, dimensions and vulnerable parts of the equipment.
- Where available, preferably use the original transport packaging and protective materials.
- Protect lamp heads, arms, displays, bases and protruding parts separately against movement and impact.
- If requested, send the complete equipment, power supply, controls and relevant parts for proper diagnosis.
- The sender bears the risk of transport damage while the equipment is being shipped to X-treme Smile®.
- Damage caused by inadequate or unsuitable packaging is not covered by warranty.
- Shipping, transport, packaging and insurance costs are not reimbursed by X-treme Smile®.
- This also applies to return transport after repair and shipment of a replacement part or replacement whitening lamp.
Support via X-treme Smile®
If you have a technical problem with an X-treme Smile® whitening lamp, always contact us first. We will help determine what information is needed and whether the equipment needs to be inspected.
If the problem is covered by the applicable warranty, we follow the warranty procedure. If the problem concerns user damage, an external cause or a defect outside the warranty period, we can offer our own paid repair service where possible.
Our warranty and repair service is provided on a walk-in / carry-in basis. Outbound and return transport and shipping costs, including shipment of a replacement part or replacement whitening lamp, are not included.
Any rights that cannot be excluded under applicable mandatory law remain fully applicable.