Do I need to use all three BLINQ steps?

Yes. When using the BLINQ tooth gem bonding system, we recommend using all three steps in the correct order. The products are designed to work as one system, and each step has a specific function in the bonding process.

Step 1 – BLINQ Blue Etch

Blue Etch prepares the enamel for bonding by creating a microscopic surface suitable for adhesion.

Etch must be used carefully and according to the correct protocol. It should only be applied to the enamel area where the tooth gem will be placed. Incorrect use, excessive application time or contact with the gums can irritate or damage soft tissue and unnecessarily affect the enamel.

More etch or a longer etching time does not automatically mean stronger bonding.

Step 2 – BLINQ Primer

After etching, BLINQ Primer is applied. The primer provides an important connection between the prepared enamel surface and the bonding layer that follows.

Skipping this step may reduce the quality and predictability of the bond. Always apply the primer according to the recommended procedure.

Step 3 – BLINQ Glue

BLINQ Glue is used to secure the tooth gem. Once the jewelry has been positioned correctly, the material is cured with a suitable curing light.

Finishing is also important. Use enough bonding material for secure attachment while avoiding unnecessarily thick edges or excessive material. A smooth finish makes the area more comfortable and easier to keep clean.

Can I skip one of the steps?

When using the BLINQ system, we do not recommend it. Blue Etch, Primer and Glue each have their own function and are designed to be used consecutively.

Other professional dental bonding systems may use a different protocol with more or fewer steps. Always follow the instructions for the system you are using and do not randomly combine components from different systems.

Bond strength also depends on correct cleaning and isolation, keeping the tooth dry, correct product amounts, tooth gem positioning, adequate curing and careful finishing.